There are always problems that can go up when using a hair cutter at home, this not only happens over time, if they are not cleaned correctly, they can have a malfunction, and if it has not had much experience with these, it can be difficult to know which one It is the problem, and to solve.
If your hair cutter is working bad, here are some steps that can help you know what the problem is and to solve it.
- Clean hair clipper
If you have been using your hair cutter for a while, you may require proper cleaning, doing so, you must follow some simple steps.
Remove the lid that adjust the cutting number and continue to brush the hair of the mower, if it seems that it can not clean it correctly, continue to insert a needle as a pin, or a clip, and be sure to clean the device correctly.
If you have baby oil, clean the blade and top of the hair clipper with a paper cotton pad, this will make the blades have more movement.
You get it, pour soup into a container and add water, and let the blades run into the water, it will clean it properly.
Every time you use the machine, be sure to clean it, for better results.
- Change the battery
If you do not turn on or do any action, you may have to change the battery, although most of them are rechargeable, there is a possibility that you need to replace the battery, if you recently bought it, the store could be helpful.
To check the battery, you must open the hair clipper.
You will need tools that do not tread or damage the sides.
Once it has opened it properly, the battery will be clearly visible.
These are easy to eliminate and, if you have already bought a new one, the process will go quickly.
- Replace the blade
If you have had the hair cutter for more than a year, you should consider replacing the blade, as these deteriorate and may be the cause of malfunction.
Find the right tools to open hair clipper.
After its open, get a screwdriver, and proceed to unscrew the sheet
Replace it with a new blade, wrinkle it backwards.
At this point you should have that your hair could
- Check the cables
This can be the cause of your problem, for this, you must follow a series of steps:
First you will have to find the right tools to open the hair clipper and do not damage it.
Once you have your tools, proceed to open the hair cutter carefully
You will see the battery, the cables, and you will have a better appearance of the blade.
On one side you will find a screw, this will loosen the belt
If the problem is that the belt is released, then screw this until the strap is in place
If that was not the problem that proceeds to loosen the belt.
To replace the belt, make sure it is correctly placed, and screw it until the strap feels like your back instead, once the strap moves correctly, the blades will work.
- Consider buying a new one.
Repair a hair cutter can be expensive, if you can not solve the problem on your own, you should consider buying a new
Select a hair cutter that is not only useful, but it will work correctly during the time you need it.
It can cost a little more to buy a good quality hair cutter, but if it is within your budget, what you should consider getting the best you consider will be adjusted to your needs.